Everyone thought one-step milling was impossible, but now experience it with CRAFT 5X. CRAFT 5X extends beyond mechanical limitations of conventional milling machines and reproduces your design as it is. One-step milling is complete by producing the abutments and the suprastructures simultaneously with the 5-axis reverse milling method.
While conventional custom abutment production goes through complex stages of designing, milling, and scanning the abutment, one-step milling reduces the production stages by milling the abutment and the suprastructure at the same. Save your time more than one day through milling the abutment during sintering the zirconia bridge. It also improves the accuracy by preventing errors that may occur during scanning.
CRAFT 5X perfectly reproduces contours of teeth in detail with the 90 degree milling. The 90 degree milling provides great satisfaction with innovative milling methods that goes beyond the conventional framework.
CRAFT 5X uses a C-clamp for the 90 degree milling. The externals of teeth can be milled vertically with a block raised to 90 degrees because one side of the C-clamp is open. Delicate milling is possible as it is milling the block at 90 degrees. Tools can get into the undercut areas which cannot be milled at 0 degrees and 180 degrees. In addition, the high-performance motor which precisely controls the milling axes and the rigid frame body made of whole castings enable the error-free 90 degree milling.
The 90 degree milling is very useful when detailed milling is required like interproximal areas, labial textures, and gingiva lines. Especially, anterior teeth where aesthetic aspects are important. It eliminates the cumbersome process of hand trimming zirconia crowns and dramatically reduces working time.
Everything is possible in one machine!
A dust collector, a water pump, and a compressor are all-in-one.
CRAFT 5X can be installed anywhere without space restriction.
In addition, anyone can use it easily and maintenance is simple.
I’m Vito Chiovelli, from ‘TECNODENTAL Sas’ in Rome, Italy.
I’ve been using the dental lab scanner, FREEDOM HD for four years, and when I needed a dental milling machine, I chose DOF’s CRAFT 5X without hesitation.
What I like the most is that it’s All-in-One machine. It allows me to mill both dry and wet including titanium premilled. Just connect the machine to the power and it’s ready to mill. High accuracy and quietness during milling are also great advantages of CRAFT 5X.
CRAFT 5X is very versatile and compact.
A truly excellent machine.
Take a peek inside our basic course